Support: Clamp

No. 60620 Clamp Support is used as illustrated, to mount a 3-bolt Messenger Suspension Clamp where a
second cable is to be added to an existing installation. It can be used at either tangent or corner positions.
A slot in the upper section of the Suppport slips over the head of the 5/8 inch (15.9 mm) through bolt without disturbing the cable suspended on the other side of the pole. The lower end is secured by a 1/2 x 4 inch (12.7 x 101.6 mm) lag bolt.

The Clamp Support includes a 5/8 x 2 1/2 inch (15.9 x 63.5 mm) square head machine bolt and nut.
Messenger clamps and lag bolts are ordered separately.