Clamp: Bonding Ribbon
Used to attach bonding ribbon to manhole walls and roofsMaterial: Lead Strip
View DetailsClamp: Cable
Used for attaching cables to walls or other surfaces. Size identification is stamped on each clamp.C3-24A is manufactured from aluminum, all others...
View DetailsClamp: Crossover
Crossover Clamps are used for clamping messenger cables together when they cross each other at right angles.Bolts are high strength 1/2 inch (12.7 mm)...
View DetailsClamp: Drop Wire
Drop Wire Clamps consist of three basic parts body, wedge and shim.No. 22500 consists of hard aluminum body, shim and wedge, with a stainlesss steel...
View DetailsClamp: Figure 8 Cable
The basic unit for supporting Figure 8 Cable is a single aluminimum Clamp Section. These Clamp Sections are used in pairs and are reversible to...
View DetailsClamp: Figure 8 Cable (Supporting Unit)
For supporting straight runs and corners up to 5 ft. (1524 mm) pull, the Lag Clamp is available. It is equipped with a 1/2 inch(12.7 mm) lag thread...
View DetailsClamp: Ground
Strand Ground Clamps are used to provide a permanent electrical ground between cable sheath and messenger. The connection is soldered to the cable...
View DetailsClamp: Ground
This malleable iron clamp is used to ground from steel strand 1/4" (6.4mm) to 3/8" (9.5 mm) to a copper ground wire #9 to #4 size.
View DetailsClamp: Guy
SLACAN Guy Clamps are made from hot rolled steel bars. The straight parallel grooves provide maximum holding area. The ends are sheared in a manner...
View DetailsClamp: Lashing Wire
No. 60053 Lashing wire Clamp is a galvanized formed steel clamp and is used to terminate the cable lashing wire.Available in 2 or 3 washer versions.
View DetailsClamp: Lashing Wire
The Lashing Wire Clamp is made from aluminium alloy sections with 3/8 inch (9.5 mm) galvanized steel hardware for clamping up to 4/0 conductor.
View DetailsClamp: Messenger
Messenger Clamps are produced from hot rolled steel bar and mounted on machine or double arming bolts.No. 8903 and 8904 are furnished with two high...
View DetailsClamp: Parallel Groove
The parallel groove clamps are made in aluminium or malleable iron.The large groove accommodates .25 - .81 (6.4 - 20.6 mm) diameter cableThe small...
View DetailsClamp: Span
Span Clamp (Type C) is used for making mid span service attachments. It is designed for use on strand sizes from 1/4 to 7/16 inches (6.4 to 11.1 mm)...
View Details