Bracket: 72 KV Top Line Post

This welded bracket is used at the top of poles in conjunction with 7/8" (22 mm) stud mounted insulators used in armless construction.This item meets...

Bracket: Angle Pole Top Welded

The Angle Pole Top Bracket is used for armless construction with stud mounted line post insulators.It is designed to meet the CSA C83 strength...

Bracket: Corner Construction

Bracket Nos. 60892 and 60893 are made from .625 inch (15.9mm) round steel, have drop-forged eyes and include No. 22530 tower eyes for suspension type...

Bracket: Cross Arm Mounting

These brackets are used to fit around the crossarm and provide a location to mount cutouts or lightning arrestors.The come with 1/2" (12.7mm)...

Bracket: Cutout / Arrestor

For pole mounting cutouts up to 15 KV, and arrestors up to 18 KV

Bracket: Cutout & Arrestor

Single Phase Cutout and Arrestor Bracket is made from 2 inch (50.8 mm) channel and is supplied with .5 inch (12.7 mm) bolts, nuts and lock washerNote:...

Bracket: Cutout & Arrestor

Cutout and Arrestor Brackets are designed to mount one, two or three phase cutout and arrestor equipment and comesupplied with 1/2" hex. bolts, nuts...

Bracket: Cutout & Arrestor - Round Tube

Cutout and Arrestor Brackets are designed to mount one, two or three phase cutout and arrestor equipment to poles. They are supplied with 1/2"...

Bracket: Cutout & Arrestor Welded

These Brackets are made with 1 inch (25.4 mm) by 2 inch (50.8 mm) rectangular tube and are supplied with .5 x 2.5 inch(12.7x63.5mm) hex. bolts, nuts...

Bracket: Cutout Arrestor Pole Mounting

This bracket is mounted to the pole with a machine bolt and lag screw and porvide mounting for a lightning arrestor and a cutout on one bracket.

Bracket: Cutout/Lightning Arrestor

These brackets are used to pole mount cutouts or lighting arrestors.

Bracket: Drop Lead Support

Drop Lead Support Brackets are designed to mount in existing holes of steel crossarms to provide a horizontal mount for insulators at drop locations.

Bracket: Extended Combination Mounting

Material: Steel

Bracket: Insulator, Angle Mounting

This bracket is used on crossarms for angle mounting of pin or post type insulators. It consists of a malleable iron casting supplied with 3 inch (76...

Bracket: Lighting Arrestor Horizontal Mounting

Bracket: Neutral Wire (Non-Insulated Type)

Non-insulating Neutral Wire Brackets for use on rural lines are supplied in cast aluminum alloy. Both types accommodate a .5 inch (12.7 mm) diameter...

Bracket: Pole Mounting

This bracket is pole mounted using a machine bolt and a lag screw, which porivdes a mounting location for various equipment.

Bracket: Pole Top (69 KV)

This ductile iron bracket is used for mounting post insulators up to 69 KV.Minimum Ultimate Strength 2700 lbs (12 KN).

Bracket: Pole Top (Armless)

This welded bracket is used at the top of poles in conjunction with stud mounted insulators used in armless construction.Minimum Ultimate Strength...

Bracket: Pole Top Insulator (35KV)

This ductile iron bracket is used for mounting post insulators up to 35 KV.Minimum Ultimate Strength 2700 lbs (12 KN).